To force re‑sync with TOP:
If the One100 already has an IP on ETH1 (default 192.168.1.1/24):
Check the cable integrity and ensure you are using the correct port type (Crossover vs. Straight-through).
For detailed technical specs and advanced routing features like VPN or firewall settings, refer to the full ONE100 Installation Manual or the OneOS User Guide .
To ensure a successful installation, follow these top tips:
interfaces on the rear panel, typically starting from port 5/0. Network (LAN) : Connect an Ethernet cable from your local switch to the Ethernet port 1/0 on the rear panel. Uplink (WAN)