W2 Pro Tweak Exclusive -

It is designed to work across various applications, essentially "spoofing" the camera hardware to show custom content. Technical Context & Availability

; Kobra 2 Pro Tweak Start M220 S100 ; Reset speed factor M221 S100 ; Reset flow factor M104 Smaterial_print_temperature_layer_0 ; Set nozzle temp M140 Smaterial_bed_temperature_layer_0 ; Set bed temp G28 ; Home all axes M420 S1 ; Enable mesh bed leveling (uses stored data) ; If you prefer fresh leveling every print, replace M420 S1 with the following: ; G29 ; Auto bed leveling G1 Z5 F3000 ; Lift nozzle M109 Smaterial_print_temperature_layer_0 ; Wait for nozzle temp G92 E0 ; Reset extruder G1 Z0.3 F3000 ; Move to prime height G1 X60 E15 F1000 ; Prime line G1 X100 E20 F1000 ; Prime line continued G92 E0 ; Reset extruder again G1 Z2 F3000 ; Lift slightly ; End of Tweak w2 pro tweak

| Problem | Likely Cause | The Fix | | :--- | :--- | :--- | | | Incorrect firmware version | Perform a "BROM Mode" flash. Hold volume down while connecting USB. Use SP Flash Tool's "Format All + Download" (warning: this wipes IMEI if it's a SIM model). | | Bluetooth keeps disconnecting | Cache corruption | Go to Developer Options > Revoke USB Debugging Authorizations . Then unpair and re-pair from your phone. | | Heart rate sensor stays black | Sensor driver mismatch | Flash back to stock sensor file. Find lens_calibration.bin from your original backup and re-flash only that file via "Download Only" mode. | It is designed to work across various applications,